Commercial Door Installation Atlanta, GA
- Code-compliant commercial door installation
- Storefront, automatic, hollow metal, and fire-rated doors
- OEM parts on every install
- We work around your business hours
- 90-day workmanship warranty on labor
Certified Door Installers
A-24 Hour Door National Inc. provides commercial door installation in Atlanta, GA. We install storefront glass, automatic sliding doors, hollow metal doors, fire-rated doors, and rolling steel doors.
Our team works with retailers, offices, hotels, health facilities, and warehouses. Whether you are moving into a new facility, fitting out a leased space, or upgrading an entrance, we are the right team to work with.
Our AAADM-certified technicians will measure each opening and order the door and hardware to match. Then, they will install it properly according to specs. Every installation job is backed by a 90-day workmanship warranty.
Why Choose A-24 for Door Installation?
We are the commercial door company trusted by Atlanta businesses because of the following:
- Licensed and Insured:
Our company and crews are licensed and insured. You are protected from the first visit to the final test. - We Order and Install:
You do not need to buy the door yourself. We can supply the door, frame, and hardware. - OEM Parts and Hardware:
We use OEM parts and hardware. This keeps the manufacturer’s warranty on your new door valid. - Measured and Fit to Spec:
We measure the opening first. A door that fits right lasts longer and closes right. - Built to Pass Inspection:
We install fire-rated, exit, and ADA-compliant doors in accordance with code. Your install will be ready for inspection. - We Handle Permits:
Our team handles permits and works with inspectors. You skip the paperwork. - Flexible Scheduling:
We can install before you open, after you close, or in stages. Your business keeps running. - 90-Day Workmanship Warranty:
We back our installation work with a 90-day labor warranty. Add to it the manufacturer’s warranty on the door itself. - Clear and Upfront Quotes:
You get an itemized quote up front. You approve it before we order or install anything. - 30 Years of Door Work:
A-24 has installed and repaired doors for over three decades. We have seen almost every type of entrance and every problem. - Over-the-phone troubleshooting and technical support before we dispatch, and if we can fix it over the phone you save time and money.
We are the go-to for facility managers.
Reliable Commercial Door Installation Services in Atlanta
We provide reliable commercial door installation services throughout Atlanta. For us, the work begins before any door is installed. First, we study the opening. We look at how the door is used, how much traffic it handles, the security it requires, and any applicable safety codes.
That way, we can pinpoint the right door, correct frame, and proper hardware for the job. And we ensure that your new door fits, passes inspection, and withstands daily traffic.
Our team only works with high-quality hardware. We hang every door with OEM parts, which keeps the manufacturer’s warranty valid. For busy entrances, we use heavy-duty, commercial-grade components built for constant use.
Our AAADM-certified techs are trained in automatic doors. We also install fire-rated and exit doors to code.
Since our team works with commercial spaces, we know the importance of not disrupting business. Our trucks come stocked, we work around your hours, and we test every door before we leave.
Commercial Doors We Install in Atlanta
Here are the main types of commercial doors we install, and where each one fits best.
Storefront Glass Entrances
These are glass front doors with metal or all-glass frames. They are best for shops, restaurants, and offices on the street. We fit the glass, frame, and locks as one set. And we ensure the door swings and seals in one smooth movement. Our team also handles glass, board-up, and swing doors.
Automatic Sliding Doors
These doors open on their own so that your customers can walk through hands-free. They work great for grocery stores, hotels, and clinics. Our AAADM-certified techs set the sensors and the speed. We test to confirm that the door opens safely for everyone. Call us for automatic swing, telescoping, and bi-fold doors.
ADA and Handicap Door Operators
A push-plate operator opens the door for you. It helps people in wheelchairs and anyone with full hands. ADA doors are important in public spaces, so much so that many accessibility rules now require them. Our techs install them on both new and existing doors.
Hollow Metal Doors
These are strong steel doors and frames that take heavy use every day. They fit back doors, stairwells, kitchens, wet rooms, and service halls. Our team is available to hang new hollow metal doors in steel frames. We will also add the right hinges and closer to carry the weight.
Fire-Rated Doors
These steel or wood doors slow down fire and smoke. The code requires them in stairwells and on some walls. To pass inspection, the door, frame, and hardware must all be fire-rated. We will order the matched set and install it to code.
Rolling Steel and High-speed Doors
Like the name, rolling steel doors roll up to open and lock down tight to close. They are best for storefronts, warehouses, and service bays that need a strong guard. High-speed doors open and close fast to keep traffic moving and maintain an air seal. We install and test every door to code.
Overhead Garage Doors
Our team installs sectional and vertical lift doors for loading areas, fire stations, and fleet garages. We match the door and opener to the opening. We also set up Hormann commercial garage doors with their openers.
Loading Dock Doors and Equipment
A dock door is only as good as the gear around it. We install the door along with the levelers, seals, shelters, bumpers, and dock lights, so the whole bay works together. That keeps loading safe and the space dry, even in bad weather. We match every part to your dock and your traffic.
How to Choose the Right Door for Your Building
The right door depends on the opening, not just the look. Here is what we walk through with you.
- Location: An exterior entrance, an interior office door, and a loading bay each need a different type of door.
- Fire and exit rules: Doors in rated walls or exit paths must meet fire and life-safety codes. That sets the rating, frame, and hardware.
- Access needs: Public entrances may need ADA operators, so every customer can get in.
- Traffic: A door used 50 times a day and one used 5,000 times needs different builds. More traffic calls for heavy-duty parts.
- Security: High-risk areas require steel doors, latch guards, electric locks, or rolling gates.
- Hardware: Closers, panic bars, hinges, and locks matter as much as the door. The wrong closer wears out a good door early.
We Work with Different Types of Businesses
Different businesses need different doors. We match the install to how your space works.
Retail Stores: These need storefront glass that draws shoppers in. It is often backed by rolling grilles or security gates for after-hours.
Offices: Lobby entrances handle steady traffic and have interior, stairwell, and suite doors. We can tie new doors into card readers and electric locks.
Medical Facilities: Automatic and ADA-friendly entrances for patients. We also install hands-free operators and code-rated doors where required. Our crews work clean and quiet around patient areas.
Hotels and Restaurants: These need entrances that look good and can handle a lot of guests. We install automatic doors, glass entrances, and back-of-house steel doors that take kitchen traffic.
Warehouses and Industrial Sites: Hollow metal man doors and overhead, high-speed doors for heavy cycles. They need to keep up with constant shift work.
Our Seamless Door Installation Process
Our process keeps the project simple for you. Here is how it works.
1. Tell us about your project
First, you call us. We will ask about your building, openings, and what each door needs to do. The more we learn up front, the better we can plan. This first talk helps us bring the right ideas to your site visit.
2. We measure and quote
A-24 technicians will come to your business space and measure every opening by hand. They will help you choose the door type, material, and hardware that suit the spot. Then you get an itemized quote. The price is set before any work begins.
3. We supply the door
After you approve the quote, we place the order. Your door, frame, and OEM hardware are made to the exact sizes we measured. We will tell you how long the build will take, so you can plan around the delivery date.
4. We install around your hours
Our crew sets up when it suits your business, whether that is early, late, or on a weekend. We can also split the job into stages. Your entrance keeps working, and your customers keep coming while we install.
5. We test and hand it over
We test the door, the closer, and every safety component to ensure they work. Next, we show you how to use the door and what to watch for. We clear away the mess and leave the opening clean.
Commercial Door Installation Company Near You
We are a local commercial door installation company with crews working across Atlanta every week. We install office and lobby doors in:
We dispatch techs across 30303, 30305, 30306, 30307, 30308, 30309, 30310, 30311, 30312, 30313, 30314, 30315, 30316, 30317, 30318, 30319, 30324, 30326, 30327, 30328, 30329, 30331, 30332, 30336, 30337, 30338, 30339, 30340, 30341, 30342, 30344, 30345, 30346, 30349, 30350, 30354, 30360, 30363.
If your project is outside these areas, call us. We may cover your site too.
Preventative Maintenance for Your New Doors
Preventative maintenance starts the day your doors go in. A new door works perfectly on day one, but commercial traffic wears it down over time. Regular care keeps that day-one performance going.
We can set up a maintenance schedule for your installation. On each visit, our techs adjust closers, tighten hardware, test exit devices, and check sensors on automatic doors. Proper upkeep also supports the manufacturer’s warranty on your new door.
Ask about adding a maintenance plan when you book your installation.
Schedule Your On-Site Measurement in Atlanta
Schedule your on-site measurement to start your door project the easy way. An A-24 technician will arrive at your building, measure the openings, and help you select the right doors.
Once you approve the quote, we order the doors and install them during business hours. On top of that, we will back our installation with a 90-day workmanship warranty.
One door or a full building, the process is the same.
Stay Connected with Us
About Atlanta, GA
Atlanta is one of the fastest-growing big cities in the South. You can see it in the skyline. Cranes, new towers, and renovated buildings are a constant part of the view.
The Beltline is filled with new shops, offices, and apartments. Landmarks like Ponce City Market show how the city turns older buildings into busy commercial space.
Atlanta is also called “the city in a forest” because of its huge tree canopy. With major colleges like Georgia Tech and a booming film industry, the city keeps building, block by block.
Frequently Asked Questions
What fun things can I do in Atlanta, GA?
Atlanta has plenty to do. You can visit the Georgia Aquarium, walk or bike the Beltline, or catch a game at Mercedes-Benz Stadium. You can also relax in Piedmont Park or eat your way through Ponce City Market.
What is the most common type of commercial door in Atlanta?
Aluminum-framed storefront glass doors are the most common, since shops want visibility. Behind the scenes, hollow metal doors are the workhorses for back rooms and stairwells.
Do you handle permits and inspections?
Yes. We guide you through the permitting process, install the door in accordance with applicable codes, and work with the building inspector to ensure your project passes inspection.
How much does commercial door installation cost in Atlanta?
Cost depends on the door type, the size, the hardware, and any code requirements. We measure on-site first, then give you a clear, itemized quote before any work starts.