24-Hour Door Services

A-24 Hour Door National Inc. offers commercial door repair services in Rochester, NY. 

What sets our commercial door company apart?

• AAADM-certified technicians
• We offer over-the-phone troubleshooting and technical support to save you time and money, making us the go-to for facility managers.
• We have trucks stocked with commonly used parts, allowing us to dispatch a technician to you promptly.
• 24-hour same-day service
• 30 years of experience in the industry

Call (800) 884-4440 for emergency door repair in Rochester.

Commercial Door Repair Service Rochester NY

Our commercial door repair service in Rochester NY, involves inspecting, adjusting, and restoring entry systems used in business properties.

This includes doors made of steel, aluminum, and composite materials. We provide services across warehouses, offices, retail shops, and schools. Each visit targets the cause of door failure, whether misalignment, broken parts, or failed openers.

We begin by checking the entire system. They test hinges, frames, locks, closers, and moving parts for wear or damage. Problems often involve multiple parts, like sagging frames with cracked hinges or doors that scrape the floor due to foundation shift.

Different systems need different fixes. Aluminum entryways commonly have frame separation or loose handles. High-speed roll-up entryways may jam due to debris in the tracks or motor failure. Each problem is handled with materials and tools matched to the door’s exact build and function.

Rochester businesses call us after impact damage, forced entry, or seasonal swelling. Cold weather especially causes metal contraction, which pulls bolts loose or causes closers to leak fluid. Regular checks help avoid complete replacement by correcting these early signs.

Local building codes require exits to close fully and latch without extra force. That means even minor faults, like resistance in the swing, can create violations. Before completing a job, we confirm that repaired entryways comply with the Americans with Disabilities Act (ADA) requirements.

Call (800) 884-4440 for repairs. 

Garage Door Service That Solves Slow Openers and Jerky Starts

Our garage door service fixes slow openers and jerky starts by checking the motor, tracks, and moving parts.

We begin by testing the opener to see if worn gears, low voltage, or poor signal response cause the delay. Then, we check the tracks, rollers, and springs to see if resistance is causing the commercial door to move unevenly.

Jerky usually starts when parts are loose or dry. We tighten bolts, adjust the force settings, and lubricate the rollers and hinges. If a part is broken, we replace it on the spot using parts that match your system.

This service prevents damage to your motor over time. An entryway that starts rough stresses the opener and shortens its life.

Garage Door Repair for Your Business

Our garage door repair focuses on fixing problems that slow operations or risk safety.

We start by checking the opener, springs, and tracks for signs of wear, damage, or misalignment. If the system is loud, slow, or stuck, we find the cause and replace faulty parts on-site.

Commercial systems are used more frequently than residential ones. That’s why we examine everything, rollers, sensors, hinges, and wiring, to prevent failures that could stop deliveries or delay opening hours. Every fix restores smooth movement and secure access.

We serve businesses across Rochester with same-day service. Whether it’s a warehouse, loading dock, or storefront, we keep your entry systems working right and ready for work.

Call (800) 884-4440 now!

How We Fix Commercial Doors

As a commercial door company, we follow a clear process to restore function and safety to business entry systems.

1. Our team thoroughly inspects the frame, hardware, and opener for signs of damage, wear, or alignment issues. In Rochester, seasonal shifts often affect how entry points close and lock.
2. Next, we test the system in motion. We check for delays, uneven movement, or noise when opening and closing. If parts are loose, bent, or worn out, we adjust or replace them on the spot to avoid disruption.
3. We also provide scheduled door maintenance in Rochester to prevent sudden failures. This includes tightening hardware, lubricating moving parts, and replacing components before they break. Regular upkeep extends system life and keeps your business running smoothly.
4. Every fix is made with safety in mind. We meet local building codes and ADA standards before marking a job complete. Whether your entry system is aluminum or steel, our commercial team is here to restore full function.

Signs Your Glass Storefront Door Needs Repair

These signs show your storefront entry needs repairs to stay safe, secure, and fully functional:

• It sticks when opening or closing: A jammed or dragging motion often means the frame is warped or misaligned. This can worsen over time and damage other parts of the entry system.
• You hear grinding, scraping, or popping sounds. This unusual noise often comes from loose pivots, worn closers, or debris in the threshold. These sounds signal early mechanical failure.
• The lock doesn’t engage properly: If the handle wiggles or the key turns with resistance, the latch or cylinder may be misaligned or failing.
• There’s a visible crack or chip: Even small cracks can spread fast. In commercial spaces, damaged panels increase safety risks and may not meet local code.
• Air or water leaks around the frame: Gaps between the structure and the frame cause drafts and water seepage. This leads to higher energy costs and interior damage.
• It shakes in the wind or feels loose: Movement in the frame or hardware during everyday use often weakens the fasteners or structure.
• The automatic closer doesn’t work smoothly:  If it slams shut, moves too slowly, or won’t hold position, the hydraulic or spring mechanism may be faulty.
• Visible rust or stains on hardware: Corroded hinges, handles, or brackets reduce strength and can suddenly fail under pressure.

Call (800) 884-4440 if you notice these signs.

Can Door Closers be Repaired?

Yes, closers can be repaired if the problem involves adjustment, leaking, or loose mounting.

Most issues result from wear, improper installation, or lack of regular maintenance. In commercial spaces, closers are used hundreds of times daily, so even minor problems build up quickly.

Common signs include slamming, slow movement, or the entry not closing. These problems often come from worn seals, low tension, or air leaks inside the unit. A technician can adjust spring tension, replace mounting hardware, or seal minor leaks.

However, not all closers are fixable. The unit cannot be restored if the body is cracked or the fluid has fully leaked out. In those cases, the best solution is replacement with a model that fits the frame and meets building codes.

Regular checks prevent early failure. Businesses in Rochester should consider this as part of ongoing maintenance. This keeps foot traffic safe, protects energy use, and helps avoid accidents caused by uncontrolled swing or poor latching.

Call (800) 884-4440 now!

Call Our Door Experts for Same-Day Repairs

Call our experts at (800) 884-4440 for same-day repairs that keep your business running without delay. We fix entry issues fast, such as stuck hinges, broken closers, or misaligned frames. Serving Rochester businesses with reliable, on-site solutions. Don’t wait for downtime to grow; call for fast help and restore access today.

We proudly serve these zip codes in Rochester:

14602, 14603, 14604, 14605, 14606, 14607, 14608, 14609, 14610, 14611, 14612, 14613, 14614, 14615, 14616, 14617, 14618, 14619, 14620, 14621, 14622, 14623, 14624, 14627, 14638, 14639, 14642, 14643, 14644, 14646, 14647, 14649, 14650, 14651, 14652, 14694

A-24 Hour Door National Inc.

344 Sycamore St, Buffalo, NY 14204

(800) 884-4440

Operation Hours:

Friday  Open 24 hours

Saturday Open 24 hours

Sunday Open 24 hours

Monday Open 24 hours

Tuesday Open 24 hours

Wednesday Open 24 hours

Thursday Open 24 hours

A-24 Hour Door National Inc. social links:

• Facebook
• Yelp
• Instagram
• Twitter

Proudly Serving Rochester New York

Rochester is a city in and the county seat of Monroe County, New York, United States. It is the fourth-most populous city and 10th most populous municipality in New York, with a population of 211,328 at the 2020 census. The city forms the core of the larger Rochester metropolitan area in Western New York, with just over 1 million residents. 

Throughout its history, Rochester has acquired several nicknames based on local industries; it has been known as “the Flour City” and “the Flower City” for its dual role in flour production and floriculture, and as the “World’s Image Center” for its association with film, optics, and photography.

The city was one of the United States’ first boomtowns, initially due to the fertile Genesee River valley, which gave rise to numerous flour mills, and then as a manufacturing center, which spurred further rapid population growth. Rochester has also played a key part in US history as a hub for social and political movements, especially abolitionism and the women’s rights movement.

Is Rochester worth visiting?

Rochester is worth visiting. The city offers rich history, scenic waterfronts, world-class museums, and events like the Lilac Festival, making it a unique and enjoyable destination.

Why is Rochester so popular?

Rochester is popular for its innovation legacy, music and art scenes, and educational institutions. It’s also known for its festivals, proximity to the Finger Lakes, and as a hub for photography and optics.

Can glass doors break from small impacts?

Glass doors can break from small impacts if they aren’t made from safety materials.

Tempered or laminated glass is used in most commercial doors because it’s stronger. However, safety glass can shatter even if hit at the edge or with a focused force. Small cracks often spread quickly, especially in high-use areas like storefronts or office entries.

Glass doors should meet ANSI Z97.1 safety standards to prevent damage. Many cities also require tempered material in commercial spaces to reduce injury risks.

Do aluminum doors last longer than wood ones?

Aluminum doors last longer than wood doors because they resist rust and don’t warp.

Aluminum is a popular choice for commercial doors because it handles weather better and needs less maintenance. In humid or high-traffic areas, aluminum frames stay in shape while wood may swell or crack.

These doors are also lighter, which puts less stress on hinges and closers. Many door companies offer anodized aluminum options that, with basic maintenance, last 20–30 years.

What does a door company do during an inspection?

A door company checks every part of the door system, including the frame, hinges, locks, and movement.

Inspections focus on door alignment, surface condition, and how the door opens and closes. The technician checks if the frame is level and whether any parts are loose, bent, or showing signs of wear.

This includes testing the opener and safety sensors for garage doors. The company also looks at seal integrity and potential weather damage for glass or aluminum doors.

What shows that garage doors need repair?

Garage doors need fixing when they shake, make noise, or stop opening smoothly.

Common problems include broken springs, loose cables, and worn rollers. You might also notice the door opens unevenly or the opener doesn’t respond. These signs mean parts are either damaged or misaligned.

Our garage door service replaces broken parts the same day. Regular checks help avoid sudden breakdowns, especially in colder months when metal parts can contract or snap.

How do garage door repair services fix noisy doors?

Our garage door repair services fix noisy doors by adjusting, lubricating, or replacing worn parts.

Noise often comes from loose chains, damaged rollers, or rusty hinges. Technicians check each moving part, tighten the tracks, and apply proper lubricant. If parts are too worn, they install replacements on-site.

Ignoring the noise may lead to full system failure. Timely repairs improve safety and prevent extra costs from larger damage.